|
DIBSŪ RAID 
DIBSŪ RAID - Fast, accurate, versatile, rugged and compact hard disk copying
equipment.
|
|
DIBSŪ RAID - Rapid Action Imaging Device
-
Description
-
Recommended Areas of Use
-
Forensic Soundness
-
Features
-
Items Included
-
Using DIBSŪ RAID
-
Specifications
-
Price and Ordering
1. Description
DIBSŪ RAID is a tough yet lightweight unit designed to enable the fast copying
of a suspect computer hard disk onto another clean hard disk. The copy can then
be examined for the presence of evidential material without risk of damaging
the original. The average copying speed can be as fast as 2.4GB per minute and,
depending on the specifications of the hard drives, up to 4GB per minute.
Two complete copying units are included together with a selecton of hard disks
to which copies can be made.
The unit is ideal for making fast copies for initial analysis and assessment of
evidence. A copied disk can then be examined with the same unit attached to a
forensic workstation in write protect mode. If evidence is found then a second
copy of the disk can be made and preserved, and/or the evidence transfered to
another media such as CD ROM. This gives the maximum level of evidential
integrity and security.
DIBSŪ RAID is designed to be portable and is supplied in a tough, waterproof
polypropylene case. It can be used in both the laboratory and on-site.
2. Recommended Areas of Use
DIBSŪ RAID is designed to be used wherever a fast copy of a hard disk is
required. For example, when conducting a covert raid on-site when time is
limited, when needing to conduct an initial analysis of drive contents.
3. Forensic Soundness
Computer forensics is concerned with the recovery of information from computers
in such a way that it can be used as evidence in a court of law. It is
primarily concerned with rules of evidence, legal processes and forensic
procedures. Computers are the subject matter and are of secondary concern.
Furthermore, in forensic science it is always necessary to ensure that accuracy
is maintained, whilst speed is of lesser importance. Therefore, work is
completed 'efficiently'; that is as fast as possible without sacrificing
accuracy.
4. Features
-
High speed copying at an average speed of 2.4GB per minute
-
Specifically designed for forensic use
-
All areas of the suspect drive are copied; absolutely no alterations are made
-
Can copy any capacity IDE/SATA drive, regardless of operating system
-
Drives to which copies are made can be wiped prior to use
-
Copying is in one direction only to help prevent accidental deletion of suspect
data
-
Includes built in integrity checking
-
Lightweight, compact and highly portable
-
Simple and intuitive to operate
-
Supplied complete with everything required
5. Items Included
-
Two (2) tough lightweight copying units - two disks can be copied at the same
time
-
Six (6) hard drives of various sizes to which copies can be made.
-
Flashlight and multi-use screwdriver
-
Power supplies
-
Hard drive connecting cables
-
Operating manual
-
Polypropylene carrying case with closed cell foam insert
6. Using DIBSŪ RAID
DIBSŪ RAID is simple to use.
-
Set the mode switch on the copying unit to Mode 3 - copy mode
-
Connect a new or wiped hard disk to one side of the copying unit. If the hard
disk has not been previously wiped it can be done using the copying unit
-
Connect the suspect drive to the other side of the copying unit. An arrow shows
in which direction the copying will take place.
-
Connect the power supply to the unit
-
Press the blue key once to turn the unit on and wait whilst it powers up both
drives.
-
Press the blue key again and copying starts.
-
When copying is complete the unit will beep and then switch itself off.
-
Disconnect both the power supply and hard disk cables and copying is complete.
-
To immediately examine the copy set the mode switch to Mode 8 - write protect
mode - and attach the copying unit to a forensic workstation using the USB2
cable supplied. The hard disk can now be examined in compete safety.
7. Specifications
|
Interface |
USB Rev 2.0/FireWire (S400)
|
| USB Connection |
Type B
|
| FireWire |
4 pin x2
|
| Dimensions |
4.25W x 3.5L x .5H in
|
| Optimal Operating Temperature/Humidity |
Temperature 41-95šF / Humidity 20-80% (Non-Condensing)
|
8. Price and Ordering
Price: Please email or call for latest price
Availability: Within 5 days of placement of order
|